Acrylics
POLIHOT is an acrylate for the fabrication of full and partial dentures by using the heat curing.
Characteristics
The colouring agents are cadmium free, therefore it isn`t toxic.
Colour matching with the acrylate for the fabrication of repairs (Policold).
Partial dentures
Shades pink, pink veined Packaging
Colour matching with the acrylate for the fabrication of repairs (Policold).
Partial dentures
Shades pink, pink veined Packaging
| 02942 POLIHOT powder pink - 500 g |
| 02866 POLIHOT powder pink - 700 g, measuring cup |
| 02876 POLIHOT powder pink veined - 700 g, measuring cup |
| 02867 POLIHOT liquid - 500 g, measuring cup |
POLICOLD is an acrylate for the fabrication of dentures, repairs and rebasings by using the cast technique and the cold curing.
Characteristics
The colouring agents are cadmium free, therefore it isn`t toxic.
Colour matching with acrylate for the fabrication of dentures using the heat curing (Polihot).
Indications Partial dentures
Repairs
Rebasings
Shades pink, pink veined Packaging
Colour matching with acrylate for the fabrication of dentures using the heat curing (Polihot).
Indications Partial dentures
Repairs
Rebasings
Shades pink, pink veined Packaging
| 02943 POLICOLD powder – 500 g |
| 02868 POLICOLD powder pink - 700 g, measuring cup |
| 02879 POLICOLD powder pink veined - 700 g, measuring cup |
| 02869 POLICOLD liquid - 500 g, measuring cup |
| 02875 Complete: POLICOLD powder pink - 200 g, Policold liquid - 150 g |
| 02885 Complete: POLICOLD powder pink veined – 200 g, Policold liquid – 150 g |
K-30 S is an acrylate for the fabrication of full and partial dentures by using the packing / pressing technique and the classical heat curing.
Characteristics
Colouring agents are cadmium free, therefore it isn`t toxic.
The use of the cold curing material Polirepar S is recommended, the colours of which matches the acrylate for the fabrication of prothesis by using the heat curing (K-30 S).
Indications Full dentures
Partial dentures
Shades pink Packaging
The use of the cold curing material Polirepar S is recommended, the colours of which matches the acrylate for the fabrication of prothesis by using the heat curing (K-30 S).
Indications Full dentures
Partial dentures
Shades pink Packaging
| 02706 K-30 S powder – 700 g, measuring cup |
| 02707 K-30 S liquid – 500 g, measuring cup |
| 02947 K-30 S powder - 500 g bag |
photos:
1
POLIREPAR S is an acrylate for the fabrication of repairs by using the cold curing.
Characteristics
The colouring agents are cadmium free, therefore it isn`t toxic.
Colour matching with acrylate for the fabrication of dentures using the heat curing K-30S.
Indications Repairs Shades pink Packaging
Colour matching with acrylate for the fabrication of dentures using the heat curing K-30S.
Indications Repairs Shades pink Packaging
| 02711 POLIREPAR S complete – 100 g powder, 75 g liquid |
| 02847 POLIREPAR S liquid – 2 x 75 g liquid |
| 02865 POLIREPAR S powder – 2 x 100 g powder |
photos:
1
ORTOPOLI is an acrylate for the fabrication of orthodontic appliances by using the spray-on technique and the cold curing.
Characteristics
Fast mixing of the powder with the liquid, the material therefore doesn`t spread all over the model.
Large choice of basic colours.
The colouring agents are cadmium free, therefore it isn`t toxic.
Indications Orthodontic appliances
Shades red, yellow, blue, transparent Packaging
Large choice of basic colours.
The colouring agents are cadmium free, therefore it isn`t toxic.
Indications Orthodontic appliances
Shades red, yellow, blue, transparent Packaging
| 02941 ORTOPOLI powder, colourless, 500g |
| 02872 ORTOPOLI powder, colourless, 700 g, shaker, brush |
| 02873 ORTOPOLI liquid, red, 500 g, measuring cup, dripping-tube |
| 02882 ORTOPOLI liquid,yellow – 500 g measuring cup, dripping-tube |
| 02883 ORTOPOLI liquid, blue – 500 g, measuring cup, dripping-tube |
| 02884 ORTOPOLI liquid, colourless – 500 g , measuring cup, dripping-tube |
POLITRAY is an acrylate for the fabrication of individual impression trays by using the cold curing.
Characteristics
Short polymerisation.
Microporous surface enables a good hold to the impression material.
Indications Individual impression trays
Shades blue Packaging
Microporous surface enables a good hold to the impression material.
Indications Individual impression trays
Shades blue Packaging
| 02944 POLITRAY powder - 500 g |
| 02870 POLITRAY powder - 700 g, measuring cup |
| 02871 POLITRAY liquid - 500 g, measuring cup |
UNITRAY LC is light-hardening material in form of prefabricated, upper baseplates to make rigid, custom impression trays and bite-blocks. This material can be cured in all ultraviolet and halogen light curing units.
Characteristics
Place the tray with the model in a light curing unit for 6 -10 min.
Indications
Custom impression tray.
Bite-block.
Shades pink Packaging
Bite-block.
Shades pink Packaging
| 15000 UNITRAY LC - box with 50 upper baseplates. |
POLITEMP is a cold–curing acrylic resin for temporary crowns and bridges.
Characteristics
High precision and thus a better contact of the crown with the gingival area of the core.
Glossy surface and minor accumulation of plaque because of the non porosity of the final product.
Highly abrasion resistant.
Simple correction.
Not toxic.
Indications Temporary crowns.
Temporary bridges.
Shades A1, A2, A3, A3.5, B3, C2, D3, Incisal Packaging
Glossy surface and minor accumulation of plaque because of the non porosity of the final product.
Highly abrasion resistant.
Simple correction.
Not toxic.
Indications Temporary crowns.
Temporary bridges.
Shades A1, A2, A3, A3.5, B3, C2, D3, Incisal Packaging
| 02904 POLITEMP powder A1 - 80 g |
| 02949 POLITEMP powder A2 – 80 g |
| 02888 POLITEMP powder A3 - 80 g |
| 02889 POLITEMP powder A 3,5 - 80 g |
| 02890 POLITEMP powder B3 - 80 g |
| 02891 POLITEMP powder C2- 80 g |
| 02892 POLITEMP powder D3 - 80 g |
| 02893 POLITEMP powder incisal - 80 g |
| 02894 POLITEMP liquid - 150 g |
